Plaats een Review

3D4Makers - Facilan™ C8 Filament - Natural - 1.75mm - 750 gram

3D4Makers - Facilan™ C8 Filament - Natural - 1.75mm - 750 gram

Facilan™ C8 is the first product of our Facilan™ family. End use industrial parts and consumer friendly printed parts as well as high end prototypes for business are the applications areas for Facilan™ C8. The first Fifth Generation 3D printing material, Facilan™ C8 has better mechanical qualities, best surface quality and high tolerances that combine to make a material suited for high throughput and high repeatability production in Additive Manufacturing

Facilan™ C8 Material Properties

  • Density 1.4 g/cm³
  • Tensile Strength 45 MPa
  • Elongation at yield 4%
  • Tensile Modulus 3000 MPa
  • Flexural Strength 67 MPa
  • Flexural Modulus 3640 MPa
  • Izod impact strength (notched) 7 kJ/m2
  • Shore D Hardness 72
  • Heat Deflection Temperature 55°C

Print Settings

  • Print Temperature: 200 °C (180-210 °C).
  • Bed Temperature: Cold or 35
  • Adhesion: Use PEI sheets. The material may adhere too well on glass when compared to other materials so use caution when removing parts.
  • Print Speed: 30 mm/s for the outer layer, 45 mm/s inner layer, 50 mm/s infill speed.

  • EAN Barcode : 8719189222203
Goedkoopst bij
Dit product is niet meer leverbaar.

Facilan™ C8 is the first product of our Facilan™ family. End use industrial parts and consumer friendly printed parts as well as high end prototypes for business are the applications areas for Facilan™ C8. The first Fifth Generation 3D printing material, Facilan™ C8 has better mechanical qualities, best surface quality and high tolerances that combine to make a material suited for high throughput and high repeatability production in Additive Manufacturing

Facilan™ C8 Material Properties

  • Density 1.4 g/cm³
  • Tensile Strength 45 MPa
  • Elongation at yield 4%
  • Tensile Modulus 3000 MPa
  • Flexural Strength 67 MPa
  • Flexural Modulus 3640 MPa
  • Izod impact strength (notched) 7 kJ/m2
  • Shore D Hardness 72
  • Heat Deflection Temperature 55°C

Print Settings

  • Print Temperature: 200 °C (180-210 °C).
  • Bed Temperature: Cold or 35
  • Adhesion: Use PEI sheets. The material may adhere too well on glass when compared to other materials so use caution when removing parts.
  • Print Speed: 30 mm/s for the outer layer, 45 mm/s inner layer, 50 mm/s infill speed.
Merk

3D4Makers B.V.

Inhoud 3D4Makers - Facilan™ C8 Filament - Natural - 1.75mm - 750 gram
Introductie jaar 2021
Leeftijd
EAN 8719189222203
Sku 2958888
2022 - 0 - 2958888 Speelgoed vergelijken doe je hier!