Plaats een Review

3D4Makers - TPC Filament - Natural - 2.85mm - 750 gram

3D4Makers - TPC Filament - Natural - 2.85mm - 750 gram

TPC-91A Filament is a thermoplastic copolyester elastomer with both thermoplastic and elastomeric properties. TPC Filament is easier to print compared to other flexible filaments like TPU. The layer bonding in the Z direction of this material is extremely good meaning that it`s almost impossible to detach the printed layers. Typical applications for this material are drive belts, vibration dampers, phone cases, wearables and other objects that need to take a lot of wear.

  • Easy to print.
  • Flexible properties.
  • Lengthening>500%

TPC-91A Filament Material Properties

  • Density 1.22 g/cm³
  • Tensile Strength 17.7 MPa
  • Elongation at tensile strength > 500%
  • Tensile Modulus 67 MPa
  • Tensile elongation break > 500%
  • Flexural Modulus 66 MPa
  • Shore A Hardness 91
  • Melting temperature tg 160°C

Print Settings

  • Print Temperature: 260°C (230-270 °C).
  • Bed Temperature: 60°C
  • Print Speed: 40 mm/s

  • EAN Barcode : 8719189222883
Goedkoopst bij
Dit product is niet meer leverbaar.

TPC-91A Filament is a thermoplastic copolyester elastomer with both thermoplastic and elastomeric properties. TPC Filament is easier to print compared to other flexible filaments like TPU. The layer bonding in the Z direction of this material is extremely good meaning that it`s almost impossible to detach the printed layers. Typical applications for this material are drive belts, vibration dampers, phone cases, wearables and other objects that need to take a lot of wear.

  • Easy to print.
  • Flexible properties.
  • Lengthening>500%

TPC-91A Filament Material Properties

  • Density 1.22 g/cm³
  • Tensile Strength 17.7 MPa
  • Elongation at tensile strength > 500%
  • Tensile Modulus 67 MPa
  • Tensile elongation break > 500%
  • Flexural Modulus 66 MPa
  • Shore A Hardness 91
  • Melting temperature tg 160°C

Print Settings

  • Print Temperature: 260°C (230-270 °C).
  • Bed Temperature: 60°C
  • Print Speed: 40 mm/s
Merk

3D4Makers B.V.

Inhoud 3D4Makers - TPC Filament - Natural - 2.85mm - 750 gram
Introductie jaar 2021
Leeftijd
EAN 8719189222883
Sku 2869816
2022 - 0 - 2869816 Speelgoed vergelijken doe je hier!