Plaats een Review

BuildTak™

BuildTak™

Looking for the ideal 3D printing surface without the use of blue masking tape, kapton sheets or hairspray on your print bed? The Formfutura BuildTak™ provides an optimal printing surface for fixating your 3D printed objects during printing, while it’s easy to install and clean, heat resistant, durable and your completed prints are easy to remove.

Product details
The Formfutura BuildTak™ is a thin plastic sheet which adheres to the print bed of your 3D printer, so it provides an ideal print surface for your 3D printed objects. By using a Formfutura BuildTak™ sheet you won’t need blue masking tape and/or polyimide films such as Kapton anymore to provide a perfect adhesion of 3D prints. Formfutura BuildTak™ sheets are made of a composition of high quality, heat-resistant raw materials which results in a durable and stable build platform while allowing for a clean, easy removal of completed builds.

The Formfutura BuildTak™ sheets are tested and works perfectly with the following filaments:
- Premium ABS & PLA
- EasyFil™ ABS & PLA
- EasyWood™
- FlexiFil™
- Laywoo-D3
- Laybrick
- EasyFil™ HIPS
- LimoSolve™

Also Taulman nylon and t-glase were printed successfully on the Formfutura BuildTak™ sheets when a thin layer of washable glue stick or wood glue was applied.

Please see below for more details with respect to the weight and packaging of our Formfutura BuildTak™ printer sheets:

Weight:

10 g

Size (L x W):

114 mm x 114 mm

Sheet thickness:

0.10 mm

For more technical specifications about our Formfutura BuildTak™ sheets, please have a look at the `SPECIFICATIONS` tab.

General Tips & Tricks for printing with the Formfutura BuildTak™
The Formfutura BuildTak™ sheet can best be used while following the instruction below:

Clean your print platform thoroughly and make sure it is free of any debris.
Trim the Formfutura BuildTak™ sheet to match the size of your build plate (if not already).
Remove the white adhesive liner and apply the Formfutura BuildTak™ sheet to the cleaned print platform. Start from one edge of the platform and work your way to the other edge, smoothing the Formfutura BuildTak™ sheet with a credit card or decal applicator.
Re-level your print surface and ensure that the nozzle height is properly set (usually between .10 and .25 mm).
Use a spatula or putty knife with smooth/rounded corners to prevent damaging to your Formfutura BuildTak™ sheet. Avoid using solvents, such as acetone, to clean it.

Typically with other build surface solutions, such as blue masking tape or polyimide, a heavy deposit or “smooth” is used on the first print layers. With the Formfutura BuildTak™ sheet this is not needed.

  • EAN Barcode : 8718924472347
Goedkoopst bij
Dit product is niet meer leverbaar.
Looking for the ideal 3D printing surface without the use of blue masking tape, kapton sheets or hairspray on your print bed? The Formfutura BuildTak™ provides an optimal printing surface for fixating your 3D printed objects during printing, while it’s easy to install and clean, heat resistant, durable and your completed prints are easy to remove.

Product details
The Formfutura BuildTak™ is a thin plastic sheet which adheres to the print bed of your 3D printer, so it provides an ideal print surface for your 3D printed objects. By using a Formfutura BuildTak™ sheet you won’t need blue masking tape and/or polyimide films such as Kapton anymore to provide a perfect adhesion of 3D prints. Formfutura BuildTak™ sheets are made of a composition of high quality, heat-resistant raw materials which results in a durable and stable build platform while allowing for a clean, easy removal of completed builds.

The Formfutura BuildTak™ sheets are tested and works perfectly with the following filaments:
- Premium ABS & PLA
- EasyFil™ ABS & PLA
- EasyWood™
- FlexiFil™
- Laywoo-D3
- Laybrick
- EasyFil™ HIPS
- LimoSolve™

Also Taulman nylon and t-glase were printed successfully on the Formfutura BuildTak™ sheets when a thin layer of washable glue stick or wood glue was applied.

Please see below for more details with respect to the weight and packaging of our Formfutura BuildTak™ printer sheets:

Weight:

10 g

Size (L x W):

114 mm x 114 mm

Sheet thickness:

0.10 mm

For more technical specifications about our Formfutura BuildTak™ sheets, please have a look at the `SPECIFICATIONS` tab.

General Tips & Tricks for printing with the Formfutura BuildTak™
The Formfutura BuildTak™ sheet can best be used while following the instruction below:

Clean your print platform thoroughly and make sure it is free of any debris.
Trim the Formfutura BuildTak™ sheet to match the size of your build plate (if not already).
Remove the white adhesive liner and apply the Formfutura BuildTak™ sheet to the cleaned print platform. Start from one edge of the platform and work your way to the other edge, smoothing the Formfutura BuildTak™ sheet with a credit card or decal applicator.
Re-level your print surface and ensure that the nozzle height is properly set (usually between .10 and .25 mm).
Use a spatula or putty knife with smooth/rounded corners to prevent damaging to your Formfutura BuildTak™ sheet. Avoid using solvents, such as acetone, to clean it.

Typically with other build surface solutions, such as blue masking tape or polyimide, a heavy deposit or “smooth” is used on the first print layers. With the Formfutura BuildTak™ sheet this is not needed.
Merk

FormFutura

Inhoud BuildTak™
Introductie jaar 2018
Leeftijd
EAN 8718924472347
Sku 1217670
2022 - 0 - 1217670 Speelgoed vergelijken doe je hier!