Plaats een Review

Rapid FLEX100™ - 500 Ml - Clear

Rapid FLEX100™ - 500 Ml - Clear

Rapid FLEX100™ Resin for low powered LED/LCD DLP type 3D printers. The FLEX100™ has an extremely high level of flexibility so you can 3D print compressible and bendable models. The thicker the part, the less flexible it will become. The clear appearance allows you to see internal structures when 3D printed.

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

The Viscosity of our resin is 30-50 cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

APPLICATION

FLEX100™ can be used on its own or by mixing with our Rapid colour range to produce varying degrees of flexibility and firmness.
By adding a small amount of FLEX100™ to the Rapid resin would create a less brittle and more durable part.
By adding larger amounts, the more flexible it will become.
Please ensure that you weigh the products so results can be replicated. Our CMYK pigment set can be used to obtain the required colours you desire.
It`s always important to follow the safety and technical information before use.
PHYSICAL PROPERTIES

ColourClear Appearance
Viscosity30-50 cps @ 25°C (Brookfield RVT)
OdourNegligible Characteristics
Shelf Life12 months
Active Solids100%
UV Cure225nm to 420nm
Cure SpeedFast with UV LED LAMPS
StorageDark Cool, dry place out of direct sunlight.
Wash UpRESINAWAY™ or IPA (Isopropyl Alcohol)
Bottle of 500 ml Resin

  • EAN Barcode : 735850381572
Goedkoopst bij
Dit product is niet meer leverbaar.
Rapid FLEX100™ Resin for low powered LED/LCD DLP type 3D printers. The FLEX100™ has an extremely high level of flexibility so you can 3D print compressible and bendable models. The thicker the part, the less flexible it will become. The clear appearance allows you to see internal structures when 3D printed.

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

The Viscosity of our resin is 30-50 cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

APPLICATION

FLEX100™ can be used on its own or by mixing with our Rapid colour range to produce varying degrees of flexibility and firmness.
By adding a small amount of FLEX100™ to the Rapid resin would create a less brittle and more durable part.
By adding larger amounts, the more flexible it will become.
Please ensure that you weigh the products so results can be replicated. Our CMYK pigment set can be used to obtain the required colours you desire.
It`s always important to follow the safety and technical information before use.
PHYSICAL PROPERTIES

ColourClear Appearance
Viscosity30-50 cps @ 25°C (Brookfield RVT)
OdourNegligible Characteristics
Shelf Life12 months
Active Solids100%
UV Cure225nm to 420nm
Cure SpeedFast with UV LED LAMPS
StorageDark Cool, dry place out of direct sunlight.
Wash UpRESINAWAY™ or IPA (Isopropyl Alcohol)
Bottle of 500 ml Resin
Merk

Monocure

Inhoud Rapid FLEX100™ - 500 Ml - Clear
Introductie jaar 2019
Leeftijd
EAN 735850381572
Sku 1480979
2022 - 0 - 1480979 Speelgoed vergelijken doe je hier!