Plaats een Review
Facilan™ HT is a material with a heat deflection temperature of 89 °C and comparatively high tensile strength. The raw material has food contact approval and is not based on Bisphenol-A. Facilan™ HT has been created as a higher performance replacement for PET, PET-G and other copolymers. High stiffness, high strength and high gloss combine to give this material good characteristics to be used in machine building, construction and for end use consumer parts. Facilan™ HT has been created to make parts that survive real life. Facilan™ HT`s printing profile is available in the Ultimaker Cura Marketplace.
Facilan™ HT Material Properties
- Density: 1.3 g/cm³
- Tensile Strength: 62 MPa
- Elongation at Yield: 7 %
- Tensile Modulus: 2100 MPa
- IZOD Impact Strength (notched): 3 kJ/m2
- Shore D Hardness: 76
- Heat Deflection Temperature (0,45 MPa): 89 °C
Print Settings
- Bed Temperature: 75 - 85 °C
- Adhesion: PEI sheet / Glass
- Print Temperature: 240 - 250 °C
- Print Speed: 40 - 75 mm/s
- EAN Barcode : 8719189222272
| Dit product is niet meer leverbaar. |
Facilan™ HT is a material with a heat deflection temperature of 89 °C and comparatively high tensile strength. The raw material has food contact approval and is not based on Bisphenol-A. Facilan™ HT has been created as a higher performance replacement for PET, PET-G and other copolymers. High stiffness, high strength and high gloss combine to give this material good characteristics to be used in machine building, construction and for end use consumer parts. Facilan™ HT has been created to make parts that survive real life. Facilan™ HT`s printing profile is available in the Ultimaker Cura Marketplace.
Facilan™ HT Material Properties
- Density: 1.3 g/cm³
- Tensile Strength: 62 MPa
- Elongation at Yield: 7 %
- Tensile Modulus: 2100 MPa
- IZOD Impact Strength (notched): 3 kJ/m2
- Shore D Hardness: 76
- Heat Deflection Temperature (0,45 MPa): 89 °C
Print Settings
- Bed Temperature: 75 - 85 °C
- Adhesion: PEI sheet / Glass
- Print Temperature: 240 - 250 °C
- Print Speed: 40 - 75 mm/s
| Merk | 3D4Makers B.V. |
| Inhoud | 3D4Makers - Facilan™ HT Filament - Natural - 2.85mm - 750 gram |
| Introductie jaar | 2021 |
| Leeftijd | |
| EAN | 8719189222272 |
| Sku | 2941692 |
-8718924476390.jpg&h=250&w=250&far=1&bg=FFFFFF "Formfutura ApolloX Donkerblauw (1.75mm, 750gram)")
--2.85mm--750-gram-8719189222777.jpg&h=250&w=250&far=1&bg=FFFFFF "PETG Filament - White (RAL9003) - 2.85mm - 750 gram")
