Qik 2s9v1 Dual Serial Motor Controller Pololu 1110

Qik 2s9v1 Dual Serial Motor Controller Pololu 1110

Productbeschrijving

This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial interface, making it easy to add motors to your microcontroller- or computer-based project. The motor supply voltage range is 4.5 to 13.5 V; the continuous current per channel is up to 1 A (3 A peak). The logic supply can be as low as 2.7 V, allowing operation with modern microcontrollers running at 3.3 V.

• Simple bidirectional control of two DC brush motors.
• 4.5 V to 13.5 V motor supply range.
• 1 A maximum continuous current per motor (3 A peak).
• 2.7 V to 5.5 V logic supply range.
• Logic-level, non-inverted, two-way serial control for easy connection to microcontrollers or robot controllers.
• Optional automatic baud rate detection.
• Two on-board indicator LEDs (status/heartbeat and serial error indicator) for debugging and feedback.
• Serial error output to make it easier for the main controller to recover from a serial error condition.
• Jumper-enabled demo mode allows initial testing without any programming.
• Optional CRC error detection eliminates serial errors caused by noise or software faults.
• Optional motor shutdown on serial error or timeout for additional safety.
• Supports daisy-chaining the qik to other qiks and Pololu serial motor and servo controllers, allowing the control of up to hundreds of motors and servos with a single serial line.

• EAN Barcode : 9507686766110